Stance Fitment Lab

Wheel & Tire Size Guide

Pick your vehicle, enter the wheel size you're considering and we'll tell you if it bolts on, what it takes to make it fit, which tire sizes keep your speedometer accurate, and which Stance wheels are in stock for your car.

1

Your Vehicle

Don't see your vehicle? Contact us and our fitment team will check it for you.

2

Wheel Setup

3

Wheel Specs

All 4 Wheels
How do I read wheel specs?

Diameter x Width – a 19x9.5 wheel is 19 inches across and 9.5 inches wide.

Offset (ET) – how far the mounting face sits from the wheel's centerline, in millimeters. A lower offset pushes the wheel out toward the fender; a higher offset pulls it in toward the suspension.

Square vs staggered – square means the same size on all four corners (and lets you rotate tires). Staggered uses wider wheels in the rear for a more aggressive look and grip.

Your fitment results will appear here

Pick your vehicle and we'll load its factory wheel specs as a starting point. Change the diameter, width and offset to the wheels you're considering, then press Check Fitment.